Wholesale Dealers of Defoamer For Oil Well Cementing - Retarders-OBC-H42L – Oilbayer Detail:
Summary
High Temperature Retarder OBC-H42L is a kind of polymeric retarder,which applies to wide temperature range and has high-temperature resistant ability. OBC-H42L has no adverse effect on settling stabilization、fluid loss、strength developing of cement slurry. The consistency of cement slurry with OBC-H42L is stable, and has good anti-channeling performance. It is appropriate to be used with water and has no special request for the water quality.
Usage range
Temperature: 60~190℃ (BHCT).
Recommend dosage:0.5~2.0% (BWOC).
Technical data
Item |
Index |
Appearance |
Light yellow liquid |
Density(20±2℃),g/cm3 |
1.15±0.05 |
Freezing Point, ℃ (winter) |
<-15 |
Thickening Time(150℃,70MPa),min |
≥240 |
Composition of cement slurry: SD“G”cement 600g, Silica fume 210g Fresh water 290g, OBC-G80L 36g, OBC-H42L 16g,OBC-X60L 4g. |
Packing
25kg/plastic drum. Or based on customers' request.
Storage
It should be stored in cool, dry and ventilated areas and avoid being exposed to the sun and rain.
Shelf life:24 months.
Product detail pictures:
Related Product Guide:
Carboxymethyl Cellulose Market to Expand with Significant CAGR During 2013 – 2019 | Oilfield Chemicals Cementing Defoamers
Naphthalene Sulfonate Market 2018-2023 Report by Sales, Consumption, Revenue and Gross Margin Analysis | Defoamer For Oil Well Cementing
Our commission is to serve our buyers and purchasers with most effective good quality and aggressive portable digital goods for Wholesale Dealers of Defoamer For Oil Well Cementing - Retarders-OBC-H42L – Oilbayer, The product will supply to all over the world, such as: Pakistan , French , Naples , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Cornelia from Guatemala - 2016.02.28 14:19
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By David from Palestine - 2015.12.28 15:18