Manufacturer of Defoamer Additives For Drilling Mud - Retarders-OBC-H50L – Oilbayer Detail:
Summary
OBC-H50L is a kind of AMPS polymer based retarder. It can prolong the thickening time of cement slurry with a good regularity. It can bring good thickening curve with right angle and no influence on strength development. It has good compatibility with various additives. No sensitive to dosage, no catastrophe point, safe to use.
Usage range
Temperature: 100℃~260℃ (BHCT).
Recommended dosage: 0.6~4.0% (BWOC).
Technical data
Item |
Index |
Appearance |
light yellow transparent liquid |
pH |
3.0±0.5 |
Density, g/cm3 |
1.10±0.05 |
Solid Content,% |
22±1 |
Thickening Time (100℃,50MPa),min |
240±30 |
Slurry composition:100% SD”G” +35% silica fume of 300 mesh+53% fresh water+0.55% OBC-G86S+1% OBC-H50L +0.5% OBC-X60L |
Packing
20KG/plastic drum. Or based on customers’ request.
Storage
It should be stored in cool, dry and ventilated areas and avoid being exposed to the sun and rain.
Shelf life:12 months.
Product detail pictures:
Related Product Guide:
Carboxymethyl Cellulose Market to Expand with Significant CAGR During 2013 – 2019 | Oilfield Chemicals Cementing Defoamers
Attractive Market Opportunities in the Nonylphenol Ethoxylates Market by 2026 | Emulsifiers And Wetting Agents
It adheres on the tenet "Honest, industrious, enterprising, innovative" to acquire new solutions continuously. It regards prospects, success as its personal success. Let us build prosperous future hand in hand for Manufacturer of Defoamer Additives For Drilling Mud - Retarders-OBC-H50L – Oilbayer, The product will supply to all over the world, such as: Swiss , Johannesburg , Pakistan , Our objective is "to supply first step products and best service for our customers, thus we are sure you must have a margin benefit through cooperating with us". If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us. We are looking forward to forming successful business relationships with new clients around the world in the near future.
By Lillian from Bogota - 2016.08.18 11:04
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Florence from Sydney - 2016.09.30 16:36