Factory directly supply Water Treatment Phpa - Fluid Loss Additives-OBC-G80S – Oilbayer Detail:
Summary
OBC-G80S is a kind of sulfonic fluid loss additive. It has characters like: anti high temperature, anti-salt, quick strength development, few free water. The product is appropriate to be used in different kinds of water and cement. It is also a kind of widespread use product, which can be used in different kinds of cement slurry systems. OBC-G80S is not only applicable in freshwater cement slurry, but also applicable in salt water cement slurry.
Functions
It decreases the fluid loss obviously. Generally less than 50ml. If increasing the dosage, fluid loss will less than 30ml.
Effective salt resistance. It can be used in saturated salt water.
Thickening time increases slightly as temperature increases in the temperature range of 70 to 90℃. It has no influence on the strength of cement stone.
Not sensitive to dosage, no catastrophe point, safety in use.
Usage range
Temperature: ≤180℃ (BHCT).
Recommend dosage:0.6~0.8% (BWOC).
Applicable in every kind of cement slurry systems, which are composed by every grade of oil-well cement(defined by GB10238 or APISpec10A) and other additives(just like silicon powder, drift beads, flyash, bentonite, barite powder and hematite).
Technical data
Item |
Index |
Appearance |
White or light yellow power |
Fluid loss(50℃,6.9MPa,30min),mL |
≤50 |
Free water(50℃),mL |
≤1 |
Composition of cement slurry: SD“G”cement 800g, Fresh water 352g, OBC-G80S 4.8g, OBC-X60L 4g. |
Packing
Packaged in 25 Kg multi-ply paper sack with waterproof plastic film inside. Or based on customers' request.
Storage
It should be stored in cool, dry and ventilated areas and avoid being exposed to the sun and rain.
Shelf life:24 months.
Product detail pictures:
Related Product Guide:
Specialty Oilfield Chemicals Consumption Market Introduction, Research Objectives, Overview, Segment by Application, share by Players, Rate Analysis, Forecast 2023. | Oil Drilling Cmc Carboxy Mthyl Cellulose
Global Specialty Cement Market Insights 2018 – Sankosha U.S.A, Fosroc Limited, Oldcastle Precast, Pocono Fabricators | Emulsifiers And Wetting Agents
Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for Factory directly supply Water Treatment Phpa - Fluid Loss Additives-OBC-G80S – Oilbayer, The product will supply to all over the world, such as: Lisbon , Muscat , Georgia , Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Doreen from San Diego - 2016.09.16 13:44
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Nora from UAE - 2015.09.21 11:01