Drag reducer agent-OBF-E400

Summary

The main components of the product are poly-alpha olefin polymer powder and mixed alcohol ether suspension. Easy to store and use. Drag reducer is used in long distance pipelines, suitable for crude oil pipelines, polymer produced by common process, suitable for pipelines that can achieve higher transport/drag reduction effect by injecting more drag reducer, keep the environment closer to the limit environment, and products are more used in cold areas. Usually the injection concentration is more than 15 ppm. By adding a small amount of drag reducing agent (ppm level) to the pipeline, the physical effect can be eliminated, the turbulence of high-speed fluid can be eliminated, and the drag of delay can be reduced. Finally, the purpose of increasing pipeline transportation capacity and reducing pipeline operation pressure can be achieved. The performance of drag reducing agent is greatly affected by the pipeline working conditions. The increase rate of drag reducing agent tested by the manufacturer only represents the data of the drag reducing agent on the manufacturer's experimental pipeline. The actual value should be based on the local test data.

Technical data

Note: The above data only represent the parameters of OBF-E400 drag reducer. The technical parameters of different types of drag reducer will be slightly different.

Application method

The product itself can be used in most long-distance pipelines. Users need to provide specific parameters of pipelines to manufacturers for simple calculation.

Drag reducer is injected into the pipeline quantitatively through plunger pump, and the injection point should be chosen at the back end of the oil pump and as close as possible to the exit end. For multi-pipeline, the injection point should be selected at the back end of the pipeline junction. In this way, drag reducer can play its performance well.

Package

Packed in IBC container barrel, 1000L/barrel. Or based on customers’ request.